Huawei G5500, User Manual

Page: 69 / 215

Figure 4-14 Incorrect operations
Step 3 Install a partition board.
NOTE
l Install a partition board between two half-width compute modules.
l Perform this operation only when no partition board is installed between two half-width compute
modules.
1. Press the air baffle in the chassis.
NOTE
The air baffle must be pressed during the entire installation process of the partition board.
2. Tilt the partition board to the chassis, align the positioning rod of the partition board with
the open slot at the bottom of the chassis, and push it in position. See (1), (2), and (3) in
Figure 4-15 .
Figure 4-15 Installing a partition board
3. After the partition board is in position, release the air baffle. The air baffle automatically
pops up.
4. Tighten the five screws that secure the partition board to the top of the chassis and the
four screws that secure the partition board to the bottom of the chassis. See (4) and (5) in
Figure 4-15 .
Step 4
Determine the position of the node. See Figure 4-16 . The G530 V2 nodes are installed in the
two lower slots of the chassis, corresponding to G530 V2-1 and G530 V2-2. The GP316s are
installed in the two upper slots of the chassis, corresponding to GP316-1 and GP316-2.
FusionServer G5500 Server
User Guide
4 Setup
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
61