manualshive.com logo in svg

Huawei G5500, User Manual

Share
Download
Huawei G5500 User Manual Download Page 134

CPU Socket

Channel

DIMM

1C

DIMM020(1C1)

DIMM021(1C2)

DIMM022(1C3)

1D

DIMM030(1D1)

DIMM031(1D2)

DIMM032(1D3)

CPU 2

2A

DIMM100(2A1)

DIMM101(2A2)

DIMM102(2A3)

2B

DIMM110(2B1)

DIMM111(2B2)

DIMM112(2B3)

2C

DIMM120(2C1)

DIMM121(2C2)

DIMM122(2C3)

2D

DIMM130(2D1)

DIMM131(2D2)

DIMM132(2D3)

 

Slots 1A1, 1B1, 1C1, 1D1, 2A1, 2B1, 2C1, and 2D1 are the primary slots of channels 1A, 1B,
1C, 1D, 2A, 2B, 2C, and 2D, respectively. Install DIMMs in primary DIMM slots first.

For details about DIMM slot locations, see 

2.7.2 DIMM Slots

.

6.2.3.3 DIMM Ranks

To understand and configure memory protection modes properly, it is helpful to learn about
single-rank, dual-rank, and quad-rank DIMMs. Some DIMM configuration requirements are
based on these classifications.

l

A single-rank DIMM has one set of memory chips that are accessed while data is written
to or read from the memory.

l

A dual-rank DIMM is, effectively, two single-rank DIMMs on the same module, with
only one rank accessible at a time.

l

A quad-rank DIMM is, effectively, two dual-rank DIMMs on the same module, with
only one rank accessible at a time.

FusionServer G5500 Server
User Guide

6 Optional Part Installation

Issue 02 (2017-12-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

126

Summary of Contents for G5500
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands