manualshive.com logo in svg

Huawei G5500, User Manual

Share
Download
Huawei G5500 User Manual Download Page 49

3.6 Removing a GP316

Context

To make full use of the space and prevent the GP316 from being removed forcibly, the upper
layer GP316 and the lower layer G530 V2 adopt dislocation design. Therefore, you must
remove the G530 V2 at the lower layer and then remove the GP316 at the upper layer.

Procedure

Step 1

Remove the G530 V2. For details, see 

3.5 Removing a G530 V2

.

Step 2

Remove the GP316.

1.

Press the unlock button on the GP316. See (1) in 

Figure 3-9

.

Figure 3-9

 Removing the GP316

2.

Open the ejector levers on the GP316 completely. See (2) in 

Figure 3-9

.

3.

Pull the GP316 out of the chassis. See (3) in 

Figure 3-9

.

4.

Close the ejector lever on the GP316. See (4) in 

Figure 3-9

.

5.

Place the removed GP316 in an ESD bag.

FusionServer G5500 Server
User Guide

3 Basic Operations

Issue 02 (2017-12-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

41

Summary of Contents for G5500
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands