manualshive.com logo in svg

Huawei G5500, User Manual

Share
Download
Huawei G5500 User Manual Download Page 137

Memory Patrol Configuration

The memory engine corrects correctable errors upon detection. If these errors are not
corrected promptly, uncorrectable errors may occur.

6.2.3.6 DIMM Installation Rules

l

General DIMM Installation Rules

–

CPU sockets connected to the installed DIMMs cannot be empty.

–

Do not mix LRDIMMs and RDIMMs in the same compute node.

–

2.7.2 DIMM Slots

 lists the DIMM installation sequence.

–

When installing DIMMs in a memory channel, install DIMMs of more ranks and
then DIMMs of fewer ranks (starting from the slot farthest from the CPU in the
channel). For example, install quad-rank DIMMs, then dual-rank DIMMs, and then
sing-rank DIMMs.

l

DIMM Installation Rules for Specific Modes

–

Installation Rules for the Memory Sparing Mode

n

Follow the general DIMM installation rules.

n

The spare configuration of each channel must be valid.

n

Different channels can have different spare configurations.

n

Each channel with DIMMs installed must have a spare rank.

–

Installation Rules for the Memory Mirroring Mode

n

Follow the general DIMM installation rules.

n

Install DIMMs in either channels 1 and 2, or channels 3 and 4. The installed
DIMMs must be of the same size and organization.

n

For a multi-CPU configuration, each CPU must have a valid memory
mirroring configuration.

–

Installation Rules for the Memory Patrol Mode

See the general DIMM installation rules.

6.2.3.7 DIMM

Installing a DIMM

Step 1

Power off the G560. For details, see 

3.1 Powering Off the Compute Node

.

Step 2

Remove the G560. For details, see 

3.3 Removing the G560

.

Step 3

Place the G560 on the ESD floor.

Step 4

Remove the cover. For details, see 

3.7 Cover

.

Step 5

Take a spare DIMM out of its ESD bag.

Step 6

Open the two fixing clips of the DIMM slot. See (1) in 

Figure 6-4

.

FusionServer G5500 Server
User Guide

6 Optional Part Installation

Issue 02 (2017-12-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

129

Summary of Contents for G5500
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands