HP HP 8753E, User Manual, Page: 74 / 699

Using the Key to Activate a Fixed Reference Marker
. . . .
Marker zero enters the position of the active marker as the A reference position. Alternatively,
you can specify the fixed point with Marker zero is canceled by
switching delta mode off.
1. To place marker 1 at a point that you would like to reference, press:
and turn the front panel knob, or enter a from the front panel keypad.
2. measure values along the measurement data trace, relative to the reference point that
you set in the previous step, press:
3. move the reference position, press:
. . .
. . . . . .
. . . . . . . .
or enter a from the front panel keypad.
I MRG REF - 1 . 1 4 1 : - 2 . 6 5 7 9
MHz
C E N T E R 1 2 5 . M H z C E N T E R 1 2 5 . M H z
M H z M H z
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Making Measurements