HP HP 8753E, User Manual, Page: 241 / 699

NETWORK ANALYZER
ES
OPEN SHORT OPEN SHORT LOAD
FOR
FOP
Figure 5-6. Standard Connections for a One Port Reflection Error-Correction
8. To measure the standard, when the displayed trace has settled, press:
Note
If the calibration kit that you selected has a choice between male or female
calibration standards, remember to select the sex that applies to the test port
and not the standard.
The analyzer displays WAIT CAL STANDARD during the standard measurement.
The analyzer underlines the after it measures the calibration standard.
9. Disconnect the open, and connect a short circuit to the test port.
10. measure the standard when the displayed trace has settled, press:
The analyzer measures the short circuit and underlines the
11. Disconnect the short, and connect an impedance-matched load to the test port.
The analyzer measures the load and underlines the
.
13. compute the error coefficients, press:
The analyzer displays the corrected data trace. The analyzer also shows the notation Cor to
the left of the screen, indicating that the correction is switched on for this channel.
Note
The open, short, and load could be measured in any order, and need not follow
the order in this example.
Optimizing Results 5-19