HP HP 8753E, User Manual, Page: 55 / 699

4.
set the span to 30 MHz, press:
Note You could also press the and keys and enter the frequency range
limits as start frequency and stop frequency values
Setting the Source Power.
5.
change the power level to -5 press:
Note You could also press and select
one
of the
power ranges to keep the power setting within the range.
Setting the Measurement.
6. change the number of measurement data points to 101, press:
7. To select the transmission measurement, press:
8. view the data trace, press:
Step 3. and apply the appropriate error-correction.
9. Refer to the Measurement Results” Chapter for procedures on correcting
measurement errors.
10. To save the instrument state and error-correction in the analyzer internal memory, press:
24 Making Measurements