HP HP 8753E, User Manual, Page: 587 / 699

ANALOG BUS DISABLED IN IF BW
Error Number When you the not
212 available for use in troubleshooting. For a description of the analog bus, refer
to the
HP Guide.
ANOTHER SYSTEM CONTROLLER ON HP-IB BUS
Error Number You must remove the active controller from the bus or the controller must
37 relinquish the bus before the analyzer can assume the system controller mode.
ARGUMENT OUT OF RANGE
Error Number The argument for a programming command is out of the specified range. Refer
206 to the
HP 8753E Programming and Command
for a list of
programming commands and argument ranges.
ASCII: MISSING 'BEGIN' STATEMENT
Error Number The you just downloaded over the HP-IB or via disk was not properly
193 organized. The analyzer is unable to read the “BEGIN” statement.
ASCII: MISSING 'CITIFILE' STATEMENT
Error Number The you just downloaded over the HP-IB or via disk was
not
properly
194 organized. The analyzer is unable to read the “CITIFILE” statement.
ASCII: MISSING 'DATA' STATEMENT
Error Number The you just downloaded over the or via disk was not properly
195 organized. The analyzer is unable to read the “DATA” statement.
Error Messages 1