HP HP 8753E, User Manual, Page: 267 / 699

If unexpected phase
variations are observed, indicates that the delay of
adapter not specified a quarter wavelength over the frequency of
correct this, recall both sets, since data was previously stored to disk, change the
. . . . . . . . . . . .
. . . . .
Example Program
following is an program for performing these operations over
HP-IB:
10 ! File : adaptrm. bas
20 !
30 ! This demonstrates how to do adapter removal over
40 !
50 ASSIGN TO 716
60 !
70 ! Select internal disk.
80 !
90 OUTPUT “INTD
,
100 !
110 ! Assign file #1 to the filename that has a
120 ! previously performed for Port l’s connector.
130 !
140 OUTPUT ;
150 !
160 ! Recall the cal set for Port 1.
170 !
180 OUTPUT
;
190 !
200 !
Assign file to the filename that has a
210 ! cal previously performed for Port connector.
220 !
230 OUTPUT “INTD ;
240 !
250 ! Recall the cal set for Port 2.
260 !
270 OUTPUT
280 !
290 ! Set the adapter electrical delay.
300 !
310 OUTPUT
320 !
330 ! Perform the “remove adapter” computation.
340 !
350 ! OUTPUT “MODS
360 END
Optimizing Measurement Results 645