HP HP 8753E, User Manual, Page: 622 / 699

n
HP DeskJet (can also be used to plot)
n
HP DeskJet (can also be used to plot)
n
LaserJets (can also be used to plot)
n
HP
n
HP
n
HP Color Graphics Printer
Epson printers which are compatible with the Epson printer control language, such
as the are also supported by the analyzer. Older Epson printers, however, such as the
will not work with the analyzer.
Mass Storage
The analyzer has the capability of storing instrument states directly to its internal memory,
to an internal disk drive, or to an external
drive. The internal 3.5 inch floppy disk can
be initialized in both and DOS formats and is capable of and writing data in both
formats. Using the internal disk drive is the preferred method, but the capability to use
external disk drives still exists. Most external disks using
protocol are compatible.
Note
The analyzer does not support the (hierarchy system) directory
format.
Caution
Do not use the older single-sided disks in the analyzer’s internal drive.
HP-IB Cables
An HP-IB cable is required for interfacing the analyzer with a plotter, printer, external disk
drive, or computer. The cables available are:
n
HP HP-IB Cable, 1.0 m (3.3 ft.)
n
HP HP-IB Cable, 2.0 m (6.6 ft.)
n
HP HP-IB Cable, 0.5 m (1.6 ft.)
Interface Cables
n
HP Centronics (Parallel) Interface Cable, 3.0
m (9.9
ft.)
n
HP Interface Cable, 1.2 m (3.9 ft.)
n
HP Serial Interface Cable, 1.2 m (3.9 ft.)
n
HP 24542G Serial Interface Cable, 3 m (9.9 ft.)
n
HP Parallel Interface Cable, 2 m (6 ft.)
n
HP Parallel Interface Cable, 2 m (6 ft.)
Compatible Peripherals