HP HP 8753E, User Manual, Page: 525 / 699

searches the directory of the disk for names recognized
as belonging to an instrument state, and displays them in the
labels. No more than five titles are displayed at one
time. If there are more than five, repeatedly pressing this key
causes the next five to be displayed. If there are fewer than
five, the remaining labels are blanked.
is a disk directory command. Pressing this will read
the six sequence titles and display them in the
labels as described in Loading a Sequence When the Title Is
Not Known. These sequences can then be loaded into internal
memory.
If
is pressed again, the next six
sequence titles on the disk will be displayed. lb read the
contents of the disk starting again with the sequence:
remove the disk, reinsert it into the drive, and press
displays only the real (resistive) portion of the measured data
on a Cartesian format. This is similar to the linear magnitude
format, but can show both positive and negative values. It is
primarily used for analyzing responses in the time domain, and
also to display an auxiliary input voltage signal for service
purposes.
Press this key after selecting the associated with port 1
error correction for adapter removal calibration.
Press this key after selecting the associated with port 2
error correction for adapter removal calibration.
recalls the previously saved modified version of the color set.
This key appears only when a color set has been saved.
provides access to the recall keys menu where specific registers
can be recalled.
presents the recall keys menu as the initial menu when
has been pressed.
recalls the instrument state saved in register 1.
recalls the instrument state saved in register 2.
the instrument state saved in register 3.
recalls the instrument state saved in register 4.
recalls the instrument state saved in register 5.
recalls the instrument state saved in register 6.
recalls the instrument state saved in register 7.
Key Definitions