HP HP 8753E, User Manual, Page: 679 / 699

disk files
using with other models, 12-6
dispersion effects, 6-101
display
blanking, 6-49
format, 6-32
four-parameter, 2-10
information,
location,
markers, 2-17
markers activation, 2-18
memory, 6-7
memory trace, 2-7
of analyzer,
setting intensity, 6-48
status notations,
titling, 2-9
trace math, 2-8
displayed measurement title, 4-29
display format
group delay, 6-33
imaginary, 6-37
magnitude, 6-36
log magnitude, 6-32
phase, 6-33
polar, 6-35
real, 6-37
smith chart, 6-34
SWR, 6-36
display functions, 6-42
color, 648
dual channel, 6-43
display functions, basic, 2-6
display functions, four-parameter, 2-10
key, 6-42
menu map, 8-6
divide measurement data by the memory
trace, 2-8
documents
reference, 6-171
does not respond to parallel (PPO), 11-19
DOS format, 11-5
down converter port connections, 3-3
frequency, 5-3
temperature, 5-2
(responds to a group execute trigger),
11-19
channel mode, 2-6, 6-43
problems with, 6-43
duration of measurements, 7-16
dynamic accuracy, 7-14
specifications, 7-13
dynamic range,
increasing,
5-56
limitations,
E
(W-state drivers), 11-19
edit
menu, 6-23, 6-25
menu, 6-24, 6-25
editing
a sequence, 2-71
frequency segments, 5-35
6-115
limit segments, 2-52
segments, 15
test sequences, 6-147
electrical
delay block, 6-6
electrical delay, 6-41
of calibration standards, 5-6
electrical length and phase distortion
measurement, 2-40
long devices
causes of measurement problems, 5-48
how to improve measurement results, 5-48
making accurate measurements of, 5-48
electrical offset, 6-74
electrostatic precautions, 7-20
enabling channels, 6-8
end or identify (EOI) control 11-18
ensuring valid calibration, 6-78
entering calibration constants, 5-27
entry block location,
entry keys, 6-9-11
key, 1
environmental characteristics, 7-20
EOI (end or identify) control 11-18
error-correction, 2-4, 5-2, 5-8
calibration standards, 5-6
changing parameters, 5-5
characteristics affected, 5-4
concepts, 6-57-109
conditions, 5-4
two-port calibration, 6-80
two-port measurements, 5-21
interpolated, 5-6
invalidating, 5-5
one-port calibration, 6-80
one-port reflection measurements, 5-18
response and isolation, 6-80
response and isolation for reflection
measurements, 5-14
response and isolation for transmission
measurements, 5-16
response calibration, 6-80
response for reflection measurements, 5-9