HP HP 8753E, User Manual, Page: 136 / 699

8. To
access the gate function menu, press:
9.
10.
11.
To set the gate parameters, by entering the marker value, press:
or turn the front panel knob to position the
“T”
center gate marker.
set the gate span, press:
(1.2) or turn the front panel knob to position the “flag” gate markers.
activate the gating function to remove any unwanted responses, press:
As shown in Figure 2-60, only response from the main path is displayed.
Note
You may remove the displayed response from inside the gate markers by
pressing and turning the front panel knob to exchange the “flag” marker
positions
Gating
Figure 2-60.
a Time Domain Transmission Example Measurement
To adjust the gate shape for the best possible time domain response, press and
select between minimum, normal, wide, and maximum. Each gate has a different
flatness, cutoff rate, and levels.
Measurements