HP HP 8753E, User Manual, Page: 607 / 699

Information The selected power range does not support the power level of one or more
Message segments in the swept list table. This message appears when swept list mode is
not on and reports the segment that is out of range. Change the segment
power or change the power range.
Information A segment entered in the swept list table caused one or more frequency
Message segments to overlap. This message appears when swept list mode is not on and
reports the segment that is overlapping another. Change the frequency
ranges of the overlapping segments.
Error Number The sequence you attempted to run does not contain commands
124
Service Error Internal test #n has failed. Several internal test routines are executed at
Number 112 instrument preset. The analyzer reports the failure detected. Refer to the
HP 8753E Network
for troubleshooting information on
internal tests and the self-diagnose feature.
Error Number The sequence running was stopped prematurely when you pressed the
157 key.
Error Number When you pause a sequence, you cannot continue it if you have modified it.
153 You must start the sequence again.
Error Messages 1