HP HP 8753E, User Manual, Page: 530 / 699

specifies which limit segment in the table is to be modified.
A maximum of three sets of segment values are displayed at
one time, and the list can be scrolled up or down to show
other segment entries. Use the entry block controls to move
the pointer to the required segment number. The indicated
segment can then be edited or deleted. If the table of limits is
designated “EMPTY,” new segments can be added using the
. . . . . . . . . .
. . . .
sets the center frequency of a in a list frequency
sweep.
enters the IF bandwidth for the active segment in a swept list
table.
enters absolute power values in the swept list table. The power
values are restricted to the current power range setting.
If port power is uncoupled, power applies to the currently
selected port, otherwise it applies to both ports (The list table
only displays one port’s power values at time due to limited
display area.) set the alternate port’s power level, you must
exit the edit list menus, select a measurement that activates the
alternate port, and then re-enter the edit list menus.
-- . . . . . . . . . . . . . . . . . . . .
sets the frequency or power span of a about a
specified center frequency.
sets the start frequency of a subsweep.
sets the stop frequency of a subsweep.
leads to the select quadrant menu, which provides the
capability of drawing quarter-page plots This is not used for
provides access to the select disk menu.
The active entry area displays the letters of the alphabet, digits
0 through 9, and mathematical symbols lb
a title, rotate
the knob until the arrow points at the letter, then press
for a maximum of 50 characters As each character is selected,
it is appended to the title at the top of the graticule.
prompts the analyzer to run a series of tests to determine a
problem.
accesses a series of sequencing menus These allow you to
create, modify, and store up to 6 sequences which can be run
automatically.
activates editing mode for the segment titled (default
title).
activates editing mode for the segment titled (default
title).
Definitions 9-41