HP HP 8753E, User Manual, Page: 542 / 699

(Option 010 only) is used to specify the parameters of the
window in the transform menu.
(Option 010 only) sets the pulse width to the widest value
This minimizes the sidelobes and provides the greatest
dynamic range.
(Option 010 is used to set the window of a time domain
measurement to the minimum value. Provides essentially no
window.
(Option 010 is used to set the window of a time domain
measurement to the normal value. the most useful
because it reduces the sidelobes of the measurement somewhat.
is used to terminate basic units: Hz, degrees,
or seconds. It may be used to terminate entries
such as averaging factor.
toggles the serial port data transmit
control mode between the Xon-Xoff protocol handshake and
the DTR-DSR (data terminal ready-data set ready)
handshake.
converts reflection data to its equivalent admittance values
converts transmission data to its equivalent admittance values.
converts reflection data to its equivalent impedance values.
converts transmission data to its equivalent impedance
Key Definitions