HP HP 8753E, User Manual, Page: 53 / 699

Principles of Microwave Connector Care
Proper connector care and connection techniques are critical for accurate, repeatable
measurements.
Refer to the calibration kit documentation for connector care information. Prior to making
connections to the network analyzer, carefully review the information about inspecting,
cleaning and gaging connectors.
Haying good connector care and connection techniques extends the life of these devices. In
addition, you obtain the most accurate measurements.
This type of information is typically located in Chapter 3 of the calibration kit manuals.
For additional connector care instruction, contact your local Hewlett-Packard Sales and Service
Office about course numbers HP + and HP +
See the following table for quick reference tips about connector care.
Connector Care Quick Reference
Extend sleeve or nut
Use plastic end-caps during storage
Set connectors contact-end down
Inspect connectors carefully
Look for metal particles, scratches, and dents
se isopropyl alcohol
Clean connector threads
Get liquid into plastic support beads
Use the correct
Use correct end of calibration block
Gage connectors before use
Making connections
Do
Do Not
Align carefully
Apply bending force to connection
Make preliminary connection lightly
Over tighten connection
Turn only the connector nut Twist or screw any connection
Use a torque wrench for connect Tighten past torque wrench “break” point
Making Measurements