Honeywell Vertex Edge, User Manual

Page: 138 / 165

Information Events
The Vertex Edge System enters informational and other non-fault events into the event history
database. These do not require any action by the user.
Use the event history to check the status of the instrument.
Event ID Description
2001 Analyzer Powered Up
2002 Detected sub LDL event
2003 First non-zero reading is detected for the window
2004 Windows Zero Reset
2005 Optics Auto Adjust Requested
2006 Optics Auto Adjust Success (LED Drive Adjusted )
2007 Accept new gas family
2008 Optics verification Started
2009 Optics verified Successfully
2010 Q-factors set
2011 Test Optics requested
2012 Started gas monitoring
2013 Stopped gas monitoring
2014 Inhibited point - run time
2015 Released the inhibited point
2016 Disabled a point - run time
2017 Enabled the disabled point - run time
2018 Inhibited point switches back to normal (times out)
2019 New hardware configuration stored
2020 Analyzer accepted new location
Vertex Edge System 137 User Manual