HMI PC Security Considerations
Connectivity
The Vertex Edge HMI PC has two one-gigabit ethernet ports, one for connecting to the internal
analyzer network, and one for connecting to an external network. The Vertex Edge HMI PC has
no wireless connectivity.
Internal Network
The internal analyzer network is 192.168.254.10x/24, and the HMI PC has the address
192.168.254.1 on this network. Only connect analyzers and the HMI PC to this internal network;
Do not connect any other device.
External Network
The connection to the external network is not required but enables additional features, including
remote web access and the Modbus TCP server. These services are disabled by default but can
be enabled via the General > Network configuration page. The default configuration of the Vertex
Edge HMI PC external network connection is via DHCP. However, if desired, a static
configuration is possible via the General > Network configuration page. Care should be taken
both in DHCP server configuration as well as in the static configuration that the network
assigned to the external connection, and that does not overlap with the internal analyzer
network.
Vertex Edge HMI External Network Services
Service
Port
Transport Protocol
Default Setting
HTTP
80
TCP
OFF
HTTPS
443
TCP
OFF
Modbus TCP
502
TCP
OFF
NOTE
Chrome browser of 93.0.xx or later version is strongly recommended to access to the HMI
remotely.
NOTE
When the web interface is enabled/used, the encrypted interface on port 443 is strongly
recommended since HTTP web service is not secure.
Vertex Edge System
159
User Manual
Summary of Contents for Vertex Edge
