Honeywell Vertex Edge, User Manual

Page: 156 / 165

… …
43186
Az 3-3
Opt1 SW
Ver
Byte[3] 2
43188
Az 1-1
Opt2 SW
Ver
Byte[3] 2 first byte: major, second byte: minor, last two bytes: build number
… …
43204
Az 3-3
Opt2 SW
Ver
Byte[3] 2
43206 Az 1-1 CC SN string[26] 13 Null terminated. Up to 25 characters
… …
43310 Az 3-3 CC SN string[26] 13 Null terminated. Up to 25 characters
43323 Az 1-1 Serial Number string[26] 13 Null terminated. Up to 25 characters
… …
43427
Az 3-3
Serial
Number
string[26] 13 Null terminated. Up to 25 characters
43440 Az 1-1 PDU ID string[26] 13 Can be used same as rack ID. Null terminated. Up to 25 characters
… ….
43544 Az 3-3 PDU ID string[26] 13 Null terminated. Up to 25 characters
43557 Az 1-1 PDU SW Ver Byte[3] 2 First byte: major, second byte: minor, last two bytes: build number
… …
43573 Az 3-3 PDU SW Ver Byte[3] 2
43575 HMI SW Ver Byte[3] 2 First byte: major, second byte: minor, last two bytes: build number
65001
Az 1-1 Reset alarms &
faults Unsigned
Integer
1 Nonzero value
…
65009
Az 3-3 Reset alarms &
faults Unsigned
Integer
1 Nonzero value
Register Hi Byte Lo Byte Data Type Length Description
40001 Pt 1 Status
Unsigned
Integer
1
point enabled, point inhibited, status of alarm and fault Bit 0: point enabled (0: disabled, 1: enabled) Bit 1 : point inhibited (0: normal, 1: inhibited) Bit 2: Alarm 1
(0: no alarm, 1: in alarm) Bit 3: Alarm 2 (0: no alarm, 1: in alarm) Bit 4: latched alarm 1 (0: no alarm, 1: in alarm) Bit 5: latched alarm 2 (0: no alarm, 1: in alarm) Bit
6: MFault (0: no alarm, 1: in Mfault) Bit 7: IFault (0: no alarm, 1: in Ifault) Bit 8: Sim Alarm 1 (0: no alarm, 1: in alarm) Bit 9: Sim Alarm 2 (0: no alarm, 1: in alarm)
Bit 10: over-range (0: no alarm, 1: in over-range) Bit 11: Warning below AL1 (0: no alarm, 1: in warning) Bit 12 ~ 15: Reserved Single Analyzer information is
Vertex Edge System 155 User Manual