Honeywell ORBIT 7120PLUS, User Manual

Page: 200 / 241

186 Orbit 7120plus/7190g User Guide
Host Command Acknowledgment Host ACK On HSTACK1 45
*Host ACK Off HSTACK0 45
Host ACK Timeout HSTATO## 45
Character Activation Mode *Off HSTCEN0 46
On HSTCEN1 46
Activation Character (Range 0-255)
*12 [DC2] HSTACH### 47
Do Not End Character Activation
After Good Read HSTCGD0 47
*End Character Activation After
Good Read HSTCGD1 47
Character Activation Timeout
(Range 1 - 300,000) *30,000 ms HSTCDT###### 47
Character Deactivation Mode *Off HSTDEN0 48
On HSTDEN1 48
Deactivation Character (Range 0-
255) *14 [DC4] HSTDCH### 48
D/E Character (Disable/Enable) *D/E Character Off METDES0 48
D/E Character On METDES1 48
Beep on BEL Character Beep on BEL On BELBEP1 49
*Beep on BEL Off BELBEP0 49
Single Code Centering Single Code Centering DECWIN1;DECTOP49;DECBO
T51;DECRGT51;DECLFT49 49
Centering Window Centering On DECWIN1 50
*Centering Off DECWIN0 50
Left of Centering Window (*40%) DECLFT### 51
Right of Centering Window (*60%) DECRGT### 51
Top of Centering Window (*40%) DECTOP### 50
Bottom of Centering Window
(*60%) DECBOT### 50
Preferred S ymbology On PRFENA1 51
*Off PRFENA0 51
High Priority S ymbology PRFCOD## 52
Low Priority S ymbology PRFBLK## 52
Preferred S ymbology Timeo u t
(*500) Range 100-3000
PRFPTO#### 52
Preferred S ymbology Defa u lt PRFDFT 53
Output Sequence Editor Enter Sequence SEQBLK 55
Default Sequence SEQDFT 55
Partial Sequence Transmit Partial Sequence SEQTTS1 56
*Discard Partial Sequence SEQTTS0 56
Require Output Sequence Required SEQ_EN2 56
On/Not Required SEQ_EN1 56
*Off SEQ_EN0 56
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page