manualshive.com logo in svg

Honeywell ORBIT 7120PLUS, User Manual

The Honeywell ORBIT 7120PLUS is a state-of-the-art barcode scanner designed for efficient and accurate scanning. Enhance your productivity with its user-friendly design and advanced scanning technology. To get started, simply download the free user manual from manualshive.com to fully unlock the potential of this exceptional product.

Share
Download
background image

Orbit 7120plus/7190g User Guide

139

Aztec Append

This function allows the scanner to append the data from several Aztec bar codes 
together before transmitting them to the host computer. When the scanner 
encounters an Aztec bar code with the append trigger character(s), it buffers the 
number of Aztec bar codes determined by information encoded in those bar codes. 
Once the proper number of codes is reached, the data is output in the order speci-
fied in the bar codes. 

Default

=

On.

Aztec Code Page

Aztec Code pages define the mapping of character codes to characters. If the data 
received does not display with the proper characters, it may be because the bar 
code being scanned was created using a code page that is different from the one 
the host program is expecting. If this is the case, scan the bar code below, select 
the code page with which the bar codes were created (see 

ISO 2022/ISO 646 

Character Replacements

 on page 218), and scan the value and the 

Save

 bar code 

from the 

Programming Chart,

 beginning on page 225. The data characters should 

then appear properly.

Chinese Sensible (Han Xin) Code

< Default All Han Xin Settings >

Han Xin Code On/Off

* On

Off

Aztec Code Page

On

Summary of Contents for ORBIT 7120PLUS


















































































































































































































































Reviews:

No comments

Related manuals for ORBIT 7120PLUS

Paradox NV75M User & Installation Manual preview
NV75M
Brand: Paradox Pages: 2
Barco G50 Quick Start Manual preview
G50
Brand: Barco Pages: 6
Carson HookUpz Smartphone Telescope Adapter Instructions For Use Manual preview
HookUpz Smartphone Telescope Adapter
Brand: Carson Pages: 16
Spector&Co T113 FABRIZIO User Manual preview
T113 FABRIZIO
Brand: Spector&Co Pages: 9
Valor G4 792FTZ Installation Manual preview
G4 792FTZ
Brand: Valor Pages: 6
BOXLIGHT Studio Experience PREMIERE 30HD User Manual preview
Studio Experience PREMIERE 30HD
Brand: BOXLIGHT Pages: 67
Baumer UNDK 20N7912/S35A Quick Start Manual preview
UNDK 20N7912/S35A
Brand: Baumer Pages: 2
Napoleon Zen ZD42BK Installation Instructions preview
Zen ZD42BK
Brand: Napoleon Pages: 2
WABCO OnSide MM16167 Maintenance Manual preview
OnSide MM16167
Brand: WABCO Pages: 52
mtf TRANSPORT SYSTEM BackPower Manual preview
BackPower
Brand: mtf TRANSPORT SYSTEM Pages: 9
nedis WIFIP130FWT3 Quick Start Manual preview
WIFIP130FWT3
Brand: nedis Pages: 24
Grandview CNV Series Instruction Manual preview
CNV Series
Brand: Grandview Pages: 4
MK Panorama Systeme PanoMachine MultiRowPlan Operator'S Manual preview
PanoMachine MultiRowPlan
Brand: MK Panorama Systeme Pages: 41
Westfalia 305 158 Mounting Instructions preview
305 158
Brand: Westfalia Pages: 10
Stiga 79-2500-01 Assemble, Instruction Manual preview
79-2500-01
Brand: Stiga Pages: 2
E&G Classics 1409-0102-10 Installation Instructions preview
1409-0102-10
Brand: E&G Classics Pages: 3
Grandstream Networks DP752 Quick Installation Manual preview
DP752
Brand: Grandstream Networks Pages: 22
Goclever cineo focus Quick Start Manual preview
cineo focus
Brand: Goclever Pages: 62

Brands by name

Popular brands

Load more brands