www.honeywell.com/security
94 | Performance Series HQA Digital Video Recorder User Guide
To set up alarm input event actions
1. On the
Local Alarm
tab, in the
Anti-Dither
box, specify the amount of time (5–600 s) to
delay the system’s reaction to subsequent triggered alarms after the first alarm is
triggered. During the anti-dither time, if the system detects another alarm, the system will
not be initiate actions for that alarm.
2. Select the actions that you want the system to initiate when an alarm input is triggered
occurs:
3. Click
Apply
to save your settings.
4. To copy the alarm event settings to additional channels, click
Copy
, select the channels
that you want to copy the settings to, and then click
OK
.
Configuring Network Alarm Inputs
A network alarm is an alarm signal originating from the TCP/IP network connection. You can use
NET SDK protocol to activate the network alarm.
To configure network alarm inputs, follow the same steps as for configuring local alarm inputs.
• Alarm Out
Select the check box to activate the selected alarm output(s) (
1
,
2
, or
3
).
In the
Latch
box, specify the amount of time (1–300 s) to delay the alarm
output signal after an alarm event is triggered.
• Show Message
Select the check box to enable a pop-up message on your local host PC.
• Alarm Upload
Select the check box to enable the system to upload an alarm signal to
the network (including to an alarm center and/or web client).
• Send Email
Select the check box to enable the system to send an email notification.
If the
Snapshot
function is enabled, an image can be attached to the
email.
• Record Channel
Select the channel(s) that you want to record. In the
Delay
box, specify
the amount of time (1–300 s) to delay recording after an alarm event is
triggered.
Note
You also need to set the alarm recording period. Go to
Storage > Schedule
to configure the current channel for
scheduled recording. See
Configuring the Video Recording
• PTZ Activation
Select the check box to activate PTZ functions, and then click
Select
. In
the
PTZ Activation
window, for each PTZ camera, select the preset,
tour, or pattern that you want to be called when an alarm event occurs,
and then click
OK
.
• Tour
Select the check box to enable a tour of the selected channels.
• Snapshot
Select the check box to take a snaphot of selected channels.
• Buzzer
Select the check box to activate a buzzer noise at the DVR.
Summary of Contents for HRHH1081
