Honeywell HRHH1081 User Manual Download Page 115

Page: 115 / 152

Configuring System Settings | 115

800-19403 - A - 12/2014

Configuring Pan/Tilt/Zoom Settings

See

Configuring PTZ Connection Settings

on page 38.

Configuring Card Overlay Settings

The card overlay settings allow the DVR to communicate with automated teller machines (ATMs)
and point of sale (POS) machines in a retail environment.

Configuring COM Settings

To configure the COM settings

1. Go to

Main Menu > Setting > System > Card Overlay > Com

2. On the

Com

tab, configure the following settings:

3. Click

Apply

, and then click

Save

to save the settings.

• Protocol

Select

None

POS

• Overlay Channel

Select a camera.

• Overlay Mode

The

Preview

and

Encode

overlay modes are enabled by default.

Clear the check boxes if you want to disable them.

• Overlay Position

Select

Top Left

Bottom Left

Top Right

, or

Bottom Right

Summary of Contents for HRHH1081

























































































































































Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands

Honeywell HRHH1081, User Manual

Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands