Honeywell HRHH1081, User Manual

Page: 49 / 152

Recording Video | 49
800-19403 - A - 12/2014
Configuring the Snapshot Recording Schedule
Follow these steps to configure the snapshot recording function. When enabled, the DVR can
take snapshots when a motion detection, video loss, video tampering, or alarm event occurs.
See
Chapter 8, Configuring Event Settings for detailed instructions.
To configure the snapshot recording schedule
1. Go to Main Menu > Setting > Storage > Schedule > Snapshot .
2. On the Snapshot tab, in the Channel box, select the channel (camera) that you want to
configure a snapshot schedule for.
3. At the top of the scheduling table, select the check box(es) of the recording type(s) that
you want to schedule:
4. At the left of the scheduling table, select the day(s) of the week that you want to configure
a recording schedule for. To configure the same recording schedule for all of the days at
the same time, select
All .
5. Click or drag the mouse in the scheduling table to set the recording period. To erase a
recording period, click the eraser icon at the right of the table. Alternatively, for the day of
the week that you want to configure, click the gear icon at the right of the table. In the
Period window, set up to six recording periods. To copy the settings to additional days,
select the appropriate check box(es) under Copy , and then click Save .
6. Click Apply to save your settings.
7. To copy the record schedule settings to additional channels, click Copy , select the
channels that you want to copy the settings to, and then click OK .
• Regular The regular recording schedule is indicated by a green bar.
• MD The motion detection recording schedule is indicated by a yellow bar.
• Alarm The alarm recording schedule is indicated by a red bar.
• MD&Alarm The motion detection and alarm schedule is indicated by a blue bar.