Honeywell HRHH1081, User Manual

Page: 61 / 152

Configuring Camera Settings | 61
800-19403 - A - 12/2014
Configuring Encoding Settings
To configure a camera’s video and audio encoding settings
1. Go to Main Menu > Setting > Camera > Encode .
2. On the Encode tab, in the Channel box, select the camera that you want to configure.
3. Configure the following settings for the primary stream and secondary stream:
• Type Set the primary stream type as Regular , MD (Motion Detection), or
Alarm . The secondary stream type is not configurable.
• Compression This setting is not configurable.
• Resolution Set the primary stream to one of the following resolutions: 1080P ,
720P , 960H , D1 , HD1 , 2CIF , or CIF . Set the secondary stream to
one of the following resolutions: D1 , CIF , or QCIF .
Note HQA DVRs can detect a connected 1080p or 720p HQA
camera's resolution as
1080P or 720P automatically.
Manually set 960H or lower resolution for analog cameras
and for 1080p HQA cameras switched to SD mode.
• Frame Rate Select a value between 1 and 30 (NTSC) or 1 and 25 (PAL).
• Bit Rate Type Set to CBR (constant bit rate) or VBR (variable bit rate).
• Quality If the bit rate type is set to VBR , select a value between 1 and 6 .
• I Frame Interval Set to 1 S or 2 S .