Honeywell HRHH1081 User Manual Download Page 79

Page: 79 / 152

Configuring Network Settings | 79

800-19403 - A - 12/2014

Configuring Multicast Settings

Multicast allows for simultaneous real-time monitoring of live video from the DVR at multiple
remote locations over the network.

To configure multicast settings

1. Go to

Main Menu > Setting > Network > Multicast

2. On the

Multicast

page, select the

Enable

check box to enable multicast.

3. In the

IP Address

box, enter a multicast IP address. The address must be valid for

multicasting and should be in the range 224.0.0.0 to 239.255.255.255 for IPv4 or have the
prefix ff00::/8. An address in the range 239.252.0.0 to 239.255.255.255 is recommended.

4. In the

Port

box, enter a multicast port number or use the default setting (

36666

5. Click

Apply

to save your settings.

6. If you want to exit the

Setting

menu, click

Summary of Contents for HRHH1081

























































































































































Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands

Honeywell HRHH1081, User Manual

Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands