Honeywell HRHH1081, User Manual

Page: 77 / 152

Configuring Network Settings | 77
800-19403 - A - 12/2014
Configuring UPnP Settings
The Universal Plug and Play (UPnP) protocol is used to map the relationship between the LAN
and the WAN.
To configure UPnP settings
1. Go to Main Menu > Setting > Network > UPNP .
2. On the UPNP page, configure the following settings:
3. If you want, you can add, edit, or delete a mapping relationship from the PAT Table list:
• To add a mapping relationship to the list, click Add to the List , and then, in the Port
Info dialog box, select the Protocol ( TCP or UDP ), enter the Int.Port and Ext.Port
details, and then click OK . To ensure data transmission, the internal and external
ports should be the same. Avoid using ports 1 to 255 or 256 to 1023.
• To edit a mapping relationship, click the mapping relationship that you want to edit,
and then, in the
Port Info dialog box, edit the Service Name , Protocol , Int.Port ,
and/or Ext.Port details, and then click OK .
• To delete a mapping relationship from the list, click the mapping relationship that you
want to delete, and then click
Delete .
4. Click Apply to save your settings.
5. If you want to exit the Setting menu, click OK .
• PAT To enable UPnP, click ON . To disable UPnP, click OFF .
• Router LAN IP Enter the DVR’s IP address from the TCP/IP page.
• WAN IP Enter the router IP address.