Honeywell HRHH1081 User Manual Download Page 128

Page: 128 / 152

www.honeywell.com/security

128 | Performance Series HQA Digital Video Recorder User Guide

Viewing System Information

In the system information interface you can view HDD information, record information, bit stream
statistics, and version details.

Viewing HDD Information

To view HDD information

1. Go to

Main Menu > Info > System > HDD Info

2. Refer to the following table to interpret the HDD information:

SATA

indicates the current HDD is normal.

indicates there is an error.

indicates that there is no HDD.

indicates that a HDD is damaged.

Type

Indicates the HDD type (for example,

Read/Write

Total Space

Indicates the total capacity of the HDD.

Free Space

Indicates the amount of free space remaining on the HDD.

Status

Indicates the operating status of the HDD.

S.M.A.R.T.

Indicates S.M.A.R.T (Self-Monitoring, Analysis, and Reporting
Technology) status.

Summary of Contents for HRHH1081

























































































































































Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands

Honeywell HRHH1081, User Manual

Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands