Honeywell HRHH1081 User Manual Download Page 117

Page: 117 / 152

Configuring System Settings | 117

800-19403 - A - 12/2014

To configure the network settings without the ATM/POS protocol

1. Go to

Main Menu > Setting > System > Card Overlay > Net

2. On the

Net

tab, configure the following settings:

3. Click

Apply

, and then click

Save

to save the settings.

• Protocol

Select

POS

• Overlay Channel

Select a camera.

• Overlay Mode

The

Preview

and

Encode

overlay modes are enabled by default.

Clear the check boxes if you want to disable them.

• Overlay Position

Select

Top Left

Bottom Left

Top Right

, or

Bottom Right

• Source IP/Port

Enter the source IP and port. The source IP refers to the host IP
address that sends out the information.

• Destination/Port

Enter the destination IP and port. The destination IP refers to the IP
address of the device that receives the information.

Summary of Contents for HRHH1081

























































































































































Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands

Honeywell HRHH1081, User Manual

Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands