Honeywell HRHH1081 User Manual Download Page 124

Page: 124 / 152

www.honeywell.com/security

124 | Performance Series HQA Digital Video Recorder User Guide

To import a system configuration

1. Insert a USB storage device containing a system configuration file (exported from another

DVR) into one of the USB ports on the DVR. The

Find USB device

dialog box opens.

2. In the

Find USB device

dialog box, click

Config Backup

3. On the

Config Backup

page, click the configuration file that you want to import (named

Config_[

YYYYMMDDhhmmss

]), and then click

Import

4. Restart the DVR to apply the new settings.

To format an external USB storage device

1. Go to

Main Menu > Setting > System > Config Backup

2. Insert a USB storage device (such as a USB flash drive) into one of the USB ports on the

DVR. The

Find USB device

dialog box opens.

3. In the

Find USB device

dialog box, click

Config Backup

4. On the

Config Backup

page, click

Refresh

. The page populates with the details of the

storage device.

5. Click

Format

6. The message "Confirm format on the selected device?" appears. Click

to format the

storage device.

Summary of Contents for HRHH1081

























































































































































Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands

Honeywell HRHH1081, User Manual

Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands