Honeywell HRHH1081 User Manual Download Page 43

Page: 43 / 152

Viewing Live Video | 43

800-19403 - A - 12/2014

Calling Presets, Tours, and Patterns

To call a preset

1. On the expanded PTZ control panel, in the

No.

box, enter the number of the preset that

you want to call, and then click the

Preset

button.

2. Click the

Preset

button again to stop calling the preset.

To call a tour

1. On the expanded PTZ control panel, in the

No.

box, enter the number of the tour that you

want to call, and then click the

Tour

button.

2. Click the

Tour

button again to stop calling the tour.

To call a pattern

1. On the expanded PTZ control panel, in the

No.

box, enter the number of the pattern that

you want to call, and then click the

Pattern

button.

2. Click the

Pattern

button again to stop calling the pattern.

Configuring Auxiliary Settings

Refer to the user guide of your PTZ camera for details on configuring auxiliary settings.

Summary of Contents for HRHH1081

























































































































































Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands

Honeywell HRHH1081, User Manual

Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands