Honeywell HRHH1081 User Manual Download Page 95

Page: 95 / 152

Configuring Event Settings | 95

800-19403 - A - 12/2014

Configuring Alarm Outputs

To configure alarm outputs

1. Go to

Main Menu > Setting > Event > Alarm Output

2. On the

Alarm Output

page, set the alarm type for each alarm output:

3. To turn off triggered alarm outputs, next to

Alarm Release

, click

4. Click

Apply

to save your changes, and then click

• Schedule

Select the alarm output(s) that you want to apply the recording
schedule settings to. For more details, see

Configuring the Video

Recording Schedule

on page 48 an d

Configuring the Snapshot

Recording Schedule

on page 49.

• Manual

Select the alarm output(s) that you want to enable for all channels.

• Stop

Select the alarm output(s) that you want to disable for all channels.

Summary of Contents for HRHH1081

























































































































































Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands

Honeywell HRHH1081, User Manual

Search results

Summary of Contents for HRHH1081

Reviews:

Related manuals for HRHH1081

Brands by name

Popular brands