Honda SH300I 2006, Manual

Page: 463 / 511

LIGHTS/METERS/SWITCHES
22-7
REAR TURN SIGNAL LIGHT BULB
Remove the following:
– brake/taillight lens (page 22-6)
– screw(s)
– turn signal light lens(es)
While pushing the turn signal light bulb in, turn it
counterclockwise to remove it, and replace it with a
new one.
Make sure the lens gasket is installed in position
and is in good condition, and replace it with a new
one if necessary.
Installation is in the reverse order of removal.
REMOVAL/INSTALLATION
Remove the body cover (page 3-6).
Remove the six screws and rear turn signal/brake/
taillight unit.
Installation is in the reverse order of removal.
LICENSE LIGHT
BULB REPLACEMENT
Remove the screw and washer, and license light
unit from the rear fender.
Pull the bulb socket out of the light housing.
Pull the bulb out of the socket and replace it with a
new one.
Installation is in the reverse order of removal.
SCREW
TURN SIGNAL LIGHT LENS
GASKETS
TURN SIGNAL
LIGHT BULB
SCREWS
REAR TURN SIGNAL/
BRAKE/TAILLIGHT UNIT
TORQUE: License light unit screw
1.5 N·m (0.2 kgf·m, 1.1 lbf·ft)
LICENSE
LIGHT UNIT
SCREW
BULB
SOCKET