Honda SH300I 2006, Manual

Page: 265 / 511

DRIVE AND DRIVEN PULLEYS/CLUTCH
11-15
Apply grease to a new needle nearing rollers.
Install the needle bearing into the driven face
squarely with the sealed side facing up so that the
depth from the driven face surface is 0.8 mm (0.03
in) using the special tool.
INSPECTION
DRIVEN FACE SPRING
Measure the driven face spring free length.
DRIVEN FACE
Check the driven face for scratches, scoring or dam-
age.
Measure the driven face boss O.D.
MOVABLE DRIVEN FACE
Check the movable driven face for scratches, scor-
ing or damage.
Check the guide grooves for stepped wear or dam-
age.
Measure the movable driven face I.D.
TOOLS:
Driver
07749-0010000
Attachment, 32 x 35 mm 07746-0010100
Pilot, 25 mm 07746-0040600
ATTACHMENT/PILOT
DRIVER
0.8 mm
(0.03 in)
NEEDLE BEARING
SERVICE LIMIT: 106 mm (4.2 in)
SERVICE LIMIT: 39.94 mm (1.572 in)
SERVICE LIMIT: 40.06 mm (1.577 in)