Honda SH300I 2006, Manual

Page: 345 / 511

FRONT WHEEL/SUSPENSION/STEERING
15-31
Refer to torque
wrench reading
information, on ser-
vice information
(page 15-3).
Tighten the steering stem adjusting nut to the speci-
fied torque using the specified tool.
Turn the steering stem left and right, lock-to-lock
several times to seat the bearings.
Loosen the steering stem adjusting nut fully and fin-
ger tighten it all the way.
Turn the inner race counterclockwise 45
°
(1/8) from
above (finger tightened) position.
Install the lock nut.
Tighten the lock nut while holding the steering stem
adjusting nut.
Make sure the steering stem moves smoothly, with-
out play or binding.
TOOL:
Pin spanner
07702-0020001
TORQUE:
Actual: 25 N·m (2.5 kgf·m, 18 lbf·ft)
Indicated: 18 N·m (1.8 kgf·m, 13 lbf·ft)
ADJUSTING NUT
PIN SPANNER
ADJUSTING NUT
TOOLS:
Socket wrench
07916-KM10000
Pin spanner 07702-0020001
TORQUE: 68 N·m (6.9 kgf·m, 50 lbf·ft)
SOCKET WRENCH
PIN SPANNER
LOCK NUT