Honda SH300I 2006, Manual

Page: 179 / 511

FUEL SYSTEM (PGM-FI)
6-69
REMOVAL/INSTALLATION
Remove the rear body cover (page 3-6).
Remove the engine stop relay from the relay con-
nector.
Installation is in the reverse order of removal.
FUEL PUMP RELAY
OPERATION INSPECTION
Remove the rear body cover (page 3-6).
Turn the ignition switch "ON".
The fuel pump relay coil is normal if the fuel pump
relay clicks.
If you hear the fuel pump relay "CLICK", but fuel
pump does not operate for a few seconds, inspect
the following:
– Fuel pump relay continuity inspection (page 6-
70)
– Fuel pump relay switch line inspection (page 6-
70)
• If the above inspections are normal, replace the
fuel pump with a new one, and recheck.
If you do not hear the relay "CLICK", inspect the fol-
lowing:
– Fuel pump relay coil line (page 6-71)
– Fuel pump relay continuity inspection (page 6-
70)
• if the above inspections are normal, Inspect the
ECM power/ground line (page 6-65).
ENGINE STOP
RELAY
FUEL PUMP RELAY