Honda SH300I 2006, Manual

Page: 156 / 511

FUEL SYSTEM (PGM-FI)
6-46
2. Clean around the pipe and set the rubber cor-
rectly.
Align the quick connect fitting with the pipe and
align the retainer locking pawls with the connec-
tor grooves.
Then press the quick connect fitting onto the
pipe until both retainer pawls lock with a
"CLICK".
If it is hard to connect, put a small amount of
engine oil on the pipe end.
3. Make sure the connection is secure and that the
pawls are firmly locked into place; check visually
and by pulling the connector.
4. Connect the fuel pump 5P connector.
5.
Do not start the
engine.
Turn the ignition switch "ON".
The fuel pump will run for about 2 seconds, and
fuel pressure will rise.
Repeat 2 or 3 times, and check that there is no
leakage in the fuel supply system.
Install the luggage box (page 3-5).
Do not bend or
twist fuel hose.
CONNECTOR
RUBBER
PIPE
LOCKING PAWLS
CONNECTOR
FUEL PUMP 5P CONNECTOR
FUEL FEED HOSE