Honda Activa SCV110, Service Manual Digest

Page: 126 / 230

KICKSTARTER/DRIVE AND DRIVEN PULLEYS/CLUTCH
9-17
Install the seal collar.
Install the damper rubbers onto the clutch drive plate.
Install the clutch shoe springs onto the shoes.
Install the clutch shoes and springs onto the drive plate.
Install the plate and secure them with E-clips.
Assemble the following:
— driven pulley
— driven face spring
— spring seat
— clutch
Set the clutch spring compressor over the clutch/driven
pulley, aligning the bosses with the holes in the clutch.
TOOL:
Clutch spring compressor
070ME – KWP-110
Hold the spring compressor in a vice.
Install the clutch/driven pulley nut and tighten it with the
socket wrench.
TOOL:
Socket wrench, 39 x 41 mm
070MA – KPL-I300
TORQUE: 54 N·m (5.5 kgf·m, 40 lbf·ft)
Remove the spring compressor from the clutch/driven
pulley assembly.
SEAL COLLAR
DAMPER RUBBER
DRIVE PLATE
E-CLIP
CLUTCH SHOE
PLATE
SOCKET WRENCH
CLUTCH
SPRING
COMPRESSOR