Honda Activa SCV110, Service Manual Digest

Page: 151 / 230

13-1
13. FRONT WHEEL/BRAKE/SUSPENSION/STEERING
SERVICE INFORMATION
GENERAL
• Riding on damaged rims impairs safe operation of the scooter.
• When servicing the front wheel, fork or steering stem, support the scooter.
• A contaminated brake disc or pad (drum or shoe) reduces stopping power. Discard contaminated pads (shoes), and
clean a contaminated disc (drum) with a high quality brake degreasing agent.
• Raise the front wheel off the ground by supporting the frame securely when servicing the front wheel and suspension.
• After the front wheel installation, check the brake operation by applying the brake lever.
• Refer to the brake system information (section 13)
• This scooter is equipped with the TUFFUP tube.
• Refer to the TUFFUP tube repair (section 14)
• Refer to section 18 for light, meter and switch inspection.
SERVICE INFORMATION 13-1
TROUBLESHOOTING 13-2
FRONT WHEEL 13-3
FRONT BRAKE 13-8
HANDLEBAR 13-12
STEERING STEM/FRONT FENDER 13-15
FRONT CUSHION 13-20
13
TORQUE VALUES
Handlebar post pinch nut 49 N·m (5.0 kgf·m, 36 lbf·ft) U-nut
Front axle nut 59 N·m (6.0 kgf·m, 43 lbf·ft) U-nut
Front brake arm nut 10 N·m (1.0 kgf·m, 7 lbf·ft)
Front wheel hub nut 49 N·m (4.9 kgf·m, 36.14 lbf·ft) Apply oil to the threads and seating surface.
U-nut
Front cushion upper bolt 32 N·m (3.3 kgf·m, 24 lbf·ft) Apply oil to the threads and seating surface.
Lock bolt replace with a new one.
Front cushion pivot arm mounting nut 26 N·m (2.6 kgf·m, 19.17 lbf·ft) U-nut
Front cushion pivot arm cover screw 4 N·m (0.4 kgf·m, 2.9 lbf·ft)
Front cushion pivot arm grease nipple nut 4 N·m (0.4 kgf·m, 2.9 lbf·ft)
Steering stem lock nut 68 N·m (7.0 kgf·m, 51 lbf·ft)
Unit: mm (in)
ITEM STANDARD
Cold tire pressure
Front axle runout
Front wheel rim runout
Front brake drum I.D.
Driver only
Driver and passenger
Radial
Axial
150 kPa (1.50 kgf/cm
2
, 22 psi)
150 kPa (1.50 kgf/cm 2 , 22 psi)
—
—
—
130 (5.12)
SERVICE LIMIT
—
—
0.20 (0.008)
2.0 (0.08)
2.0 (0.08)
131 (5.16)
SPECIFICATIONS