Honda Activa SCV110, Service Manual Digest

Page: 134 / 230

FINAL REDUCTION
10-5
BEARING REMOVER
WEIGHT
BEARING REMOVER
SHAFT
BEARING REMOVER
ATTACHMENT
DRIVER
PILOT
BEARING REPLACEMENT
LEFT CRANKCASE
Remove the final shaft bearing, counter gear shaft
bearing and drive shaft bearing using the special tools.
TOOLS:
Counter gear shaft bearing:
Bearing remover head, 12 mm
070MC – KPL-I400
Bearing remover shaft, 12 mm 070MC – KPL-I410
Final shaft bearing:
Bearing remover head, 15 mm
070MC – KPL-I500
Bearing remover shaft, 15 mm 070MC – KPL-I510
Drive shaft bearing:
Bearing remover head, 17 mm
070MC – KPL-I520
Bearing remover shaft, 15 mm 070MC – KPL-I510
Apply engine oil to new bearing rotating areas.
Drive new bearings into the left crankcase.
TOOLS:
Counter gear shaft bearing:
Driver
070GD – 001-I100
Attachment, 32 x 35 mm 070GD – 002-I140
Pilot ,12 mm 070GD – 004-I130
Final shaft bearing:
Driver
070GD – 001-I100
Attachment, 37 x 40 mm 070GD – 002-I150
Pilot, 15 mm 070GD – 004-I140
Driveshaft bearing:
Driver
070GD – 001-I100
Attachment, 42 x 47 mm 070GD – 002-I160
Pilot, 17 mm 070GD – 004-I150
Be careful not to damage the left crankcase and
transmission case mating surfaces.