Honda Activa SCV110, Service Manual Digest

Page: 49 / 230

3-12
MAINTENANCE
OIL DRAIN BOLT
OIL CHECK BOLT
COG
DRIVE BELT
Remove the drive belt (page 9-9).
Check the drive belt for cracks, separation or abnormal
or excessive wear.
Measure the drive belt width.
SERVICE LIMIT: 17.5 mm (0.69 in)
Install the drive belt (page 9-18).
FINAL DRIVE OIL
Remove the oil level check bolt.
Remove the oil drain bolt, slowly turn the rear wheel and
drain the oil.
NOTE:
Replace the final drive oil as per maintenance schedule.
After the oil is completely drained, install the oil drain bolt
with a new sealing washer and tighten it.
TORQUE: 13 N·m (1.3 kgf·m, 9 lbf·ft)
Fill the transmission case with recommended oil through
the check bolt hole up to the bottom edge of the check
bolt hole.
RECOMMENDED OIL:
Honda 4-stroke oil or equivalent motor oil
API service classification: SJ
Viscosity: SAE 20W-40
OIL CAPACITY:
0.10 liter (0.11 US qt, 0.09 lmp qt) at oil change
0.12 liter (0.13 US qt, 0.11 lmp qt) at disassembly
Install the oil level check bolt with a new sealing washer
and tighten it.
TORQUE: 13 N·m (1.3 kgf·m, 9 lbf·ft)
BATTERY
Place the scooter on its center stand on level ground.
Remove the front center cover (page 2-2).
Remove the battery from battery case (page 15-6).
Check the electrolyte level of the battery.
When the electrolyte level nears the lower level line,
remove the filler caps from the battery and add distilled
water to the upper level line.