Honda Activa SCV110, Service Manual Digest

Page: 135 / 230

FINAL REDUCTION
10-6
OIL SEAL
BEARING REMOVER
BEARING
REMOVR
SHAFT
BEARING REMOVER
WEIGHT
ATTACHMENT
PILOT
DRIVER
TRANSMISSION CASE
Remove the final shaft oil seal from the transmission
case.
Remove the final shaft bearing from the transmission
case.
Remove the driveshaft bearing and counter gear shaft
bearing using the special tools.
TOOLS:
Bearing remover head, 12 mm
070MC – KPL-I400
Bearing remover shaft, 12 mm 070MC – KPL-I410
Apply engine oil to new bearing rotating areas.
Drive new bearings into the transmission case.
TOOLS:
Driveshaft bearing:
Driver
070GD – 001-I100
Attachment, 37 x 40 mm 070GD – 002-I150
Pilot, 12 mm 070GD – 004-I130
Counter gear shaft bearing:
Driver
070GD – 001-I100
Attachment, 32 x 35 mm 070GD – 002-I140
Pilot, 12 mm 070GD – 004-I130
Final shaft bearing:
Driver
070GD – 001-I100
Attachment, 42 x 47 mm 070GD – 002-I160
Pilot, 20 mm 070GD – 004-I160
Coat the circumference and lip of a new final shaft oil
seal with engine oil.
Install a new final shaft oil seal.
FINAL SHAFT BEARING
OIL SEAL