Honda Activa SCV110, Service Manual Digest

Page: 71 / 230

5-10
FUEL SYSTEM
THROTTLE STOP SCREW
AIR SCREW
AIR SCREW ADJUSTMENT
IDLE DROP PROCEDURE
NOTE:
•
The air screw is factory preset and no adjustment is
necessary unless the carburetor is overhauled or the
air screw is replaced.
• Use a tachometer with graduations of 50 min
–1
(rpm)
or smaller that will accurately indicate a 50 min –1 (rpm)
change.
1. Turn the air screw until it seats lightly, then back it out
to the specification given.
This is an initial setting prior to the final air screw
adjustment.
Remove the O-ring from the carburetor body.
Throttle switch inspection (see page 16-7).
INSTALLATION
Install a new O-ring to the carburetor body.
Install the throttle switch by aligning the hole of the
carburetor with the hole of the throttle switch.
Install and tighten the screws ( 2 nos.) securely.
THROTTLE SWITCH
O-RING
THROTTLE SWITCH
O-RING
ALIGN
SCREWS