Hobby OPTIMA DE LUXE 2019 Manual Download Page 31

Page: 31 / 209

4. Wheels and tyres

4.6 Changing a tyre

Changing a tyre

• Place a firm base, such as a piece of wood, underneath

the car jack if the vehicle is on soft ground.

• Insert the car jack into the appropriate mounting holes.

• Turn the wheel brace one full circle to loosen the wheel

nuts, but do not remove them.

• Jack up the vehicle until the wheel is 2 -3 cm above the

ground.

• Reset the car jack if it slips while the vehicle is being jacked up.

• Remove the wheel studs/nuts and lift off the tyre.

• Place the spare tyre (not included in the scope of delivery)

on the wheel hub and align it.

After changing the tyre, the wheel nuts must be examined

(after a 50 km drive) to ensure that they are tight enough

(tighten if necessary).
The car jack (not included in the scope of delivery) must only

be inserted in the appropriate mounting holes! If the car

jack is attached in other places, this may cause damage to

the vehicle or even accidents if the vehicle falls off the jack.
The car jack is to be used only for changing tyres. It may

never be used when working underneath the vehicle!

Danger of death!

Preparing to change the tyre

• Park the vehicle on a surface that is as level and firm as

possible.

• Should there be a blowout on a public road, switch on the

warning lights and set up the warning triangle.

• Pull the hand brake, select first gear and align the wheels

so that they are straight. When the vehicle has been

brought to a halt, the automatic transmission will automati

cally shift into first gear.

• If necessary, place chocks in front of and behind the wheel

that is still in good order so as to secure the vehicle.

• Screw the nuts on and tighten them in a diagonal sequence.

• Lower the car jack and remove it.

• Tighten the wheel nuts evenly with the wheel brace. Please

refer to the operating instructions for the base vehicle for

the specified torque setting for the wheel nuts

(or chap.

4.1)

When changing a tyre, please also observe the vehicle

manufacturer‘s operating instructions.

You should have a functional spare tyre available at all
times. Therefore, have the spare tyre replaced without delay.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands