Hobby OPTIMA DE LUXE 2019 Manual Download Page 159

Page: 159 / 209

10. Built-in devices

158

To operate

Start / stand-by screen

A few seconds after the control

panel has been connected to the

power supply, a start screen will

appear.

If nothing is entered for several

minutes, a stand-by screen will

automatically be displayed.

When the time is set (see “Setting the time”) the display

alternates between the time and the room temperature

that has been set. If no time has been set, the set room

temperature will be displayed permanently.

Functions

The functions in the menu lines

and

of the control pa-

nel can be selected in any sequence. The operating parame-

ters are shown in the status line

or in the display

and

.Functions may vary, depending on the equipped fittings and

model.

Press the adjusting knob / push-

button

The display shows the setting mode.

The first icon blinks.

Selecting the setting mode

To switch on/off

To switch on

• Press the adjusting knob / pushbutton.

To switch off

• Press the adjusting knob / pushbutton for longer than 4 seconds.

•

iNet-ready

: After 2 seconds, “APP” appears on the display;

after a further 2 seconds, “OFF” appears on the display.

Previously set values / operating parameters will be reacti

vated after the control panel has been switched on.

Due to an internal lag feed in the heating or air-conditioning

system, it may take a few minutes for the Truma CP plus

control panel to switch off (during this time, "OFF" appears

in the display).

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands