Hobby OPTIMA DE LUXE 2019 Manual Download Page 65

Page: 65 / 209

6. Interior Structure

6.10 Construction of the seats

Cushion fastenings

Seat cushions are held in place by an anti-slip mat.

Ensure that the seat cushions and backrests are fastened

securely and correctly.

Side seating area in the habitation

6.11 Seatbelts in the van

The seating arrangements are fitted with safety belts.

Buckling the seatbelt

Do not twist the seatbelt.

• Grasp the tongue and insert it in the lock of the seatbelt

until you hear it snap shut.

• Guide the upper part of the seatbelt over your shoulder and

diagonally across your chest.

• The lower part of the seatbelt fits across your hips.

Seatbelts

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands