Hobby OPTIMA DE LUXE 2019 Manual Download Page 48

Page: 48 / 209

6. Interior Structure 47

Handle with locking mechanism

Door of the gas-bottle container

To open and shut the door of the gas-bottle container, both

pushlocks

must first be unlocked and then locked again.

When the gas bottles are attached, the door of the gas-

bottle container should always be firmly closed while driving

or when using the van as living space.

Door of the gas-bottle container

Pushlock fitted to kitchen doors/drawers

To open

• Press the push-lock

until the button springs out.

• To open the door or drawer, pull carefully.

To close

• Shut the door/flap or drawer.

• Press the pushlock

until the button stays in the closed

position and the door or drawer is securely closed.

Cupboard door with pushlock

Push button lock on the kitchen

drawers

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands