Hobby OPTIMA DE LUXE 2019 Manual Download Page 78

Page: 78 / 209

7. Electrical Installations 77

Charger (charging the battery)

Battery is charged via the alternator. Motor has

been started. Battery charger is not activated.

During calibration, the vehicle must not be hooked up to

the 230V mains (the charger must not charge the battery

during calibration). Furthermore, the vehicle must not be

started while the sensor for the starter battery is being

calibrated.

Battery is charged when the charger is con-

nected to the 230V mains.

Error messages

12:30

23,5 °C

09.01.15

18,0 °C

Warning message: undervoltage

This warning appears when a voltage of 10.8V or less is

measured for a battery for a duration of at least 3 minutes.

The icon for the battery, habitation or starter battery in questi

on appears in the menu.

The message can be acknowledged; the battery should be

charged immediately.

brate itself. This process takes approx. three hours. If the bat

tery circuit breaker is then switched on again, a value of “1”

should be shown on the display.

If the icons for the “Charger” appear, the van is con

nected to a 230V mains connection and the battery char

ger was recognised: the battery will be charged. Please

note: the vehicle must not be started while the sensor for

the starter battery is being calibrated.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands