Hobby OPTIMA DE LUXE 2019 Manual Download Page 168

Page: 168 / 209

10. Built-in devices 167

Malfunction

If there is a malfunction, the control panel will immediately go to

“Malfunction” mode and display the Malfunction error code.

E = Malfunction

41 = Error code

H = Heating
Cause eliminated / Return to

setting mode

- Press the adjusting knob / push

button.

- The corresponding device will be

restarted.

In this case, the malfunction will not be acknowledged on the

control panel and the warning icon will continue to be displayed.

The device will remain in a state of malfunction. Other connected

devices can be operated.

Cause not eliminated / Return to

setting mode

• Press the reset button.

Due to an internal lag feed in the connected devices, this may

take a few minutes.

If the cause has not been eliminated, the malfunction will occur again

and the control panel will once again go to “Malfunction” mode.

Summary of Contents for OPTIMA DE LUXE 2019


















































































































































































































Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands

Hobby OPTIMA DE LUXE 2019, Manual

Search results

Summary of Contents for OPTIMA DE LUXE 2019

Reviews:

Related manuals for OPTIMA DE LUXE 2019

Brands by name

Popular brands